Units were used for 2 months, then put in storage.
All units have been bench tested and meet factory specs, has slight scratches on the top.
VXR-7000 serves as a repeater or as a convenient base station for simple fleet communications in public safety, industrial or administrative work areas and helps expand reception range.
With feature rich built in functions, the VXR-7000 Series sets the standard for a mid-power continuous duty and cycle-rated repeater. The VXR-7000 Series VHF/UHF Desktop repeaters offer performance for all divisions of industry and Public Safety. Whether you are using the VXR-7000 as a base station, with it's attractive housing and user friendly controls, or as a remote repeater. This repeater will provide you with many years of reliable service.
The VXR-7000 Repeater Package Includes:
- VXR-7000 UHF or VHF Repeater
- Programming of One Channel
- Power cord
- 16 Channels
- 10 to 50 Watts (adjustable)
- VHF: 134 – 150 MHz; 150 – 174 MHz
- 8-Character ANI/ENI ID Display
- FCC Narrowbanding Compliance
Convert To Talk At A Press Of A Button
Can immediately switch to function from repeater mode to base station mode simply by pressing the Push To Talk transmit button. Once released, the unit converts back to repeater mode.
Local or Remote Operating Capability
Controlled by the operator with a press of a button, the VXR-7000 is designed to function as programmed. Or, switch to remote mode and the unit is controlled by instructions received from an external device connected to the accessory connector.
When Safety Counts
Has DTMF decoding built-in to coordinate with the Emergency and ANI functions found in Vertex Standard mobile and portable two-way radios. If an Emergency alert is received from a mobile or portable radio, the VXR-7000 will beep loudly and blink the LCD to notify the dispatcher of the emergency alert.
Uninterrupted Power Supply
For uninterrupted operation during power failures, a 12-volt rechargeable battery may be connected. During a power outage, the automatic power control circuit will immediately switch the repeater to the backup battery.
• 47 CTCSS / 108 DCS Codes Encode and Decode
• CW ID Transmitter
• BCLO, BTLO Functions
• DTMF Encode and Decode • Community Repeater Operation (up to 16 tones)
• Time-Out Timer, Hang Timer and Guard Timer
• D-Sub 25 Pin Accessory Connector
• Line Interface Port